IPS Display 2 Click

How does it work?

IPS Display 2 Click is based on the ER-TFT1.54-2, a 1.54″ TFT LCD display without a touch panel from EastRising Technology. Designed for high-resolution visual output, this display offers a crisp 240×240 pixel resolution, ideal for applications requiring clear and vibrant graphics. It connects through an 15-pin FPC connector with a 0.3mm pitch, ensuring stable communication with the host system. This board is suitable for projects requiring a compact, high-resolution screen, such as handheld devices, smart displays, or informational panels.

Though the display is not sunlight-readable, its compact design integrates it into various indoor applications. With a diagonal size of 1.54 inches, it boasts a compact form factor, featuring an outline dimension of 31.52mm (W) by 313.72mm (H) with the FPC folded and a thickness of just 1.9mm. The visual area of 28.72mm by 28.72mm ensures an optimal display experience, while the active area of 27.72mm (W) by 27.72mm (H) provides high precision in rendering content. The dot pitch of 0.1155mm by 0.1155mm guarantees fine detail in the display’s output.

The ER-TFT1.54-2 is driven by the ST7789V controller, a highly integrated single-chip controller and driver specifically designed for 262K-color graphic TFT-LCDs, offering vibrant color depth and smooth graphical performance. This board operates through a 3-wire serial SPI interface, ensuring smooth communication between the display and the host MCU. Beyond the SPI interface pins, the display also uses additional control signals for enhanced functionality.

The RST pin plays a crucial role in ensuring reliable operation by allowing the display to be reset. This is essential for recovering from errors and initializing the display during power cycles. The BCK pin serves as a display backlight control, and the RS pin serves as a display data/command selection pin, crucial for distinguishing between data and command instructions sent via the SPI interface. This enables precise control over the display’s functionality, ensuring that graphical content and operational commands are processed correctly.

This Click board™ can be operated only with a 3.3V logic voltage level. The board must perform appropriate logic voltage level conversion before using MCUs with different logic levels. Also, it comes equipped with a library containing functions and an example code that can be used as a reference for further development.

Specifications

Pinout diagram

This table shows how the pinout on IPS Display 2 Click corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).

Notes	Pin					Pin	Notes
Backlight Control	BCK	1	AN	PWM	16	NC
Reset / ID SEL	RST	2	RST	INT	15	RS	Display Data / Command Selection
SPI Select / ID COMM	CS	3	CS	RX	14	NC
SPI Clock	SCK	4	SCK	TX	13	NC
	NC	5	MISO	SCL	12	NC
SPI Data IN	SDI	6	MOSI	SDA	11	NC
Power Supply	3.3V	7	3.3V	5V	10	NC
Ground	GND	8	GND	GND	9	GND	Ground

Onboard settings and indicators

IPS Display 2 Click electrical specifications

Software Support

We provide a library for the IPS Display 2 Click as well as a demo application (example), developed using MIKROE compilers. The demo can run on all the main MIKROE development boards.

Package can be downloaded/installed directly from NECTO Studio Package Manager (recommended), downloaded from our LibStock™ or found on MIKROE github account.

Library Description

This library contains API for IPS Display 2 Click driver.

Key functions

• ipsdisplay2_fill_screen This function fills the screen with the selected color.

• ipsdisplay2_write_string This function writes a text string starting from the selected position in a 6×12 font size with a specified color.

• ipsdisplay2_draw_line This function draws a line with a specified color.

Example Description

This example demonstrates the use of the IPS Display 2 Click by showing a practical example of using the implemented functions.

void application_task ( void ) 
 { 
     ipsdisplay2_point_t start_pt, end_pt; 

 #if IPSDISPLAY2_RESOURCES_INCLUDE_IMG 
     log_printf( &logger, " Drawing MIKROE logo examplernn" ); 
     ipsdisplay2_draw_picture ( &ipsdisplay2, IPSDISPLAY2_ROTATION_VERTICAL_0, ipsdisplay2_img_mikroe ); 
     Delay_ms ( 3000 ); 
 #endif 
     log_printf( &logger, " Writing text examplernn" ); 
     ipsdisplay2_fill_screen ( &ipsdisplay2, IPSDISPLAY2_COLOR_BLACK ); 
     Delay_ms ( 1000 ); 
     start_pt.x = 60; 
     start_pt.y = 70; 
     ipsdisplay2_write_string ( &ipsdisplay2, start_pt, "      MIKROE      ", IPSDISPLAY2_COLOR_RED ); 
     start_pt.y += 20; 
     ipsdisplay2_write_string ( &ipsdisplay2, start_pt, " IPS display click", IPSDISPLAY2_COLOR_RED ); 
     start_pt.y += 20; 
     ipsdisplay2_write_string ( &ipsdisplay2, start_pt, "     240x240px    ", IPSDISPLAY2_COLOR_RED ); 
     start_pt.y += 20; 
     ipsdisplay2_write_string ( &ipsdisplay2, start_pt, "ST7789V controller", IPSDISPLAY2_COLOR_RED ); 
     start_pt.y += 20; 
     ipsdisplay2_write_string ( &ipsdisplay2, start_pt, "   TEST EXAMPLE   ", IPSDISPLAY2_COLOR_RED ); 
     Delay_ms ( 3000 ); 

     log_printf( &logger, " RGB fill screen examplernn" ); 
     ipsdisplay2_fill_screen ( &ipsdisplay2, IPSDISPLAY2_COLOR_RED ); 
     Delay_ms ( 1000 ); 
     ipsdisplay2_fill_screen ( &ipsdisplay2, IPSDISPLAY2_COLOR_LIME ); 
     Delay_ms ( 1000 ); 
     ipsdisplay2_fill_screen ( &ipsdisplay2, IPSDISPLAY2_COLOR_BLUE ); 
     Delay_ms ( 1000 ); 

     log_printf( &logger, " Drawing objects examplernn" ); 
     ipsdisplay2_fill_screen ( &ipsdisplay2, IPSDISPLAY2_COLOR_BLACK ); 
     Delay_ms ( 1000 ); 
     start_pt.x = IPSDISPLAY2_POS_WIDTH_MIN; 
     start_pt.y = IPSDISPLAY2_POS_HEIGHT_MIN; 
     end_pt.x = IPSDISPLAY2_POS_WIDTH_MAX; 
     end_pt.y = IPSDISPLAY2_POS_HEIGHT_MAX; 
     ipsdisplay2_draw_line ( &ipsdisplay2, start_pt, end_pt, IPSDISPLAY2_COLOR_BLUE ); 
     Delay_ms ( 1000 ); 
     start_pt.x = IPSDISPLAY2_POS_WIDTH_MAX; 
     start_pt.y = IPSDISPLAY2_POS_HEIGHT_MIN; 
     end_pt.x = IPSDISPLAY2_POS_WIDTH_MIN; 
     end_pt.y = IPSDISPLAY2_POS_HEIGHT_MAX; 
     ipsdisplay2_draw_line ( &ipsdisplay2, start_pt, end_pt, IPSDISPLAY2_COLOR_BLUE ); 
     Delay_ms ( 1000 ); 
     start_pt.x = 60; 
     start_pt.y = 40; 
     end_pt.x = 180; 
     end_pt.y = 100; 
     ipsdisplay2_draw_rectangle ( &ipsdisplay2, start_pt, end_pt, IPSDISPLAY2_COLOR_CYAN ); 
     Delay_ms ( 1000 ); 
     start_pt.y += 100; 
     end_pt.y += 100; 
     ipsdisplay2_draw_rectangle ( &ipsdisplay2, start_pt, end_pt, IPSDISPLAY2_COLOR_CYAN ); 
     Delay_ms ( 1000 ); 
     start_pt.x = 120; 
     start_pt.y = 120; 
     ipsdisplay2_draw_circle ( &ipsdisplay2, start_pt, start_pt.x, IPSDISPLAY2_COLOR_MAGENTA ); 
     Delay_ms ( 2000 ); 
 }

The full application code, and ready to use projects can be installed directly from NECTO Studio Package Manager (recommended), downloaded from our LibStock™ or found on MIKROE github account.

Other MIKROE Libraries used in the example:

• MikroSDK.Board
• MikroSDK.Log
• Click.IPSDisplay2

Additional notes and informations

Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all MIKROE compilers.

mikroSDK

This Click board™ is supported with mikroSDK – MIKROE Software Development Kit. To ensure proper operation of mikroSDK compliant Click board™ demo applications, mikroSDK should be downloaded from the LibStock and installed for the compiler you are using.

For more information about mikroSDK, visit the official page.