EasyPIC v7 for dsPIC30

Name: EasyPIC v7 for dsPIC30
SKU: MIKROE-1153
Price: 3950.00 ZAR
Availability: BackOrder

R3,950.00 ex. VAT

Stock: Lead-time applicable.

R3,752.50

10+

R3,653.75

15+

R3,555.00

20+

R3,456.25

SKU: MIKROE-1153 Categories: Development Boards, MikroElektronika

Description
Additional information

What’s on Board

Reset Button

High quality reset button with surrounding reset circuitry ensures stable reset operation.

mikroBUS socket 1

EasyPIC v7 for dsPIC30 provides two mikroBUS sockets for mikroElektronika Click Boards. mikroBUS provides simple and effective Plug-and-Play connectivity solution.

mikroBUS socket 2

EasyPIC v7 for dsPIC30 provides two mikroBUS sockets for mikroElektronika Click Boards. mikroBUS provides simple and effective Plug-and-Play connectivity solution.

CAN Support

Board contains MCP2551 CAN controller chip connected to screw terminal connector. This way you can implement industry-standard CAN communication with your device.

ICD2/ICD3 connector

If you need to use other external programmer with EasyPIC v7 for dsPIC30, we have provided the ICD2/ICD3 compatible connector, so you can override the on-board mikroProg.

Socket Selection Jumpers

These jumpers are used to connect mikroProg debugger lines to the approprite DIP socket where your microcontroller is located.

Button Press Level

Use these switches to pull-up or pull-down buttons in each input/output group.

mikroProg™

On-board mikroProg™ In-Circuit Debugger and programmer supports every dsPIC30® microcontroller in DIP packaging.

Programmer USB connector

Programmer USB connector is connected to on-board mikroProg, but can also be used to power the board, when the J8 jumper in the Power Supply section is in the USB position

Dual Power Supply

Board is equipped with power supply unit capable of supporting both 3.3V and 5V microcontrollers. Board can be powered over USB cable, or external adapter connectors.

RS-232 Connector

You can implement UART communication through RS-232 connector provided on the board.

USB-UART Connector

FTDI chip allows your board to be connected with a PC through USB cable over UART connection.

4-digit 7-seg display

Driving 7-segment displays is fun! EasyPIC™ v7 for dsPIC30® provides 4-digit display for your applications.

LCD 2×16 characters

Board is equipped with LCD 2×16 connector which allows you to connect LCD 2×16 display and place it securely using plastic distancer, specially designed for this purpose.

GLCD 128×64 pixels

You can place GLCD 128×64 display directly on the board and firm it in place securely using high-quality plastic distancer, specially designed for this purpose.

Touch Panel Controller

Touch panel controller with connector is provided for analog resistive touch panels attached to the GLCD 128×64 to form GLCD Touch screen.

Touchpanel connector

Additional 4-wire touchpanel connector is available for connection with EasyTFT board.

Left PORT Headers

We have provided additional PORT header on the left side of the board, so you can now access the desired microcontroller pins on the other side of the board too.

Voltage Reference

You can select to provide external voltage reference to RB0 pin which can be either 4.096V or VCC.

I2C EEPROM

You can store 8×256 bytes of configuration data or other data into on-board 24AA01 Serial EEPROM with I2C interface.

ADC potentiometers

You can simulate analog inputs using two provided analog potentiometers which can be connected to each of the 7 supported microcontroller analog input pins.

GLCD contrast potentiometer

This potentiometer allows you to adjust the contrast level of the pixels on your GLCD 128×64 display.

LCD contrast potentiometer

This potentiometer allows you to adjust the contrast level of the pixels on your LCD 2×16 character display.

Piezo Buzzer

With piezo buzzer you can debug your applications, or have audio signalization feature. It can be connected to two digital output pins, one of which is the output of PWM module.

DS1820 Temp Sensor

Board supports Dallas DS1820 One-Wire digital temperature sensor. You can measure temperatures from -55C to +125C (-67F to +257F), with 0.5C accuracy.

LM35 Temp Sensor

The LM35 is a low-cost precision integrated-circuit analog temperature sensor. It can measure temeperatures from -55C to +150C with 0.25C accuracy at room temperatures.

Crystal oscillator

10Mhz oscillator circuit that provides external clock is connected to microcontroller osc pins.

dsPIC30F4013

With just enough RAM and Flash, dsPIC4013 microcontroller will provide you with enough power for most of your DSP projects.

Oscilloscope GNDs

Three separate GND pins are available on the board for easier connection of GND reference for oscilloscope probes.

1×10 PROTO headers

We have also provided 1×10 soldering pads for further connectivity in each Input/Output group.

PORT Headers

Two male IDC10 port headers are available in each Input/Output group, which is convenient for easier access to any PORT pin.

Tri-state DIP switches

Tri-state DIP switches are used to enable 4K7 pull-up or pull-down resistor on ony desired PORT pin.

Push buttons

Push buttons in each Input/Output group enable you to have digital inputs on each port pin. Buttons are of high quality and have an exceptional and stable response.

SMD LEDs

Each Input/Output PORT group contains red SMD LEDs with low current consumption of only 1mA. Board contains total of 42 LEDs for PORT pins.

What’s EasyPIC v7 for dsPIC30

EasyPIC™ v7 for dsPIC30® is our seventh generation dsPIC® development board. It’s loaded with modules you will need in development of your DSP applications. On-board programmer and debugger, CAN support, temperature sensors, display connectors and six I/O groups are just part of the modules on this board. It is delivered with dsPIC30F4013 device.

Modules

ICD2 Connector

ICD2 connector enables users to work with other programmers while developing.

USB/UART RS-232

Write UART applications for laptops too. Besides RS-232, we also added USB-UART.

Displays

EasyTFT board with touch screen enables you to develop multimedia applications.

4 Digits Display

4 digit 7 segment display is now a part of EasyPIC v7 for dsPIC30.

Ports Buttons and LEDs

Why didn’t we think of this earlier? Ports are grouped with their buttons and LEDs

GND

We added three additional GND pins for easier access of your oscilloscope probes.

mikroBUS™ sockets

Two mikroBUS connectors enable you to use many additional Click Boards. Collection of mikroBUS™ compatible Click Boards is growing rapidly, and we have designed them with great care, so you don’t have to make any complicated settings. Just plug your board in, and you are good to go.

Weight	1260 g
Brand	MikroElektronika