Peltier Element TEC1-12706
R215.00 ex. VAT
Peltier Element TEC1-12706 is thermoelectric cooling element that uses the Peltier effect to create a heat flux at the junction of two different types of materials. This version is supporting 12V and current rating of 6A.
Peltier Element can be used with our Peltier click board.
NOTE: The Peltier element must be used with a heatsink on the hot side. Testing without a heatsink for a few seconds is acceptable, but any longer can lead to overheating and potential damage to the Peltier element.
Stock: Lead-time applicable.
| 5+ | R204.25 |
| 10+ | R193.50 |
| 15+ | R182.75 |
| 20+ | R175.87 |
A Peltier cooler, heater, or thermoelectric heat pump is a solid-state active heat pump which transfers heat from one side of the device to the other, with consumption of electrical energy, depending on the direction of the current. Such an instrument is also called a Peltier device, Peltier heat pump, solid state refrigerator, or thermoelectric cooler (TEC). It can be used either for heating or for cooling, although in practice the main application is cooling. It can also be used as a temperature controller that either heats or cools.
A Peltier cooler can also be used as a thermoelectric generator. When operated as a cooler, a voltage is applied across the device, and as a result, a difference in temperature will build up between the two sides. When operated as a generator, one side of the device is heated to a temperature greater than the other side, and as a result, a difference in voltage will build up between the two sides (the Seebeck effect).
Peltier elements all conform to a universal identification specification
Performance Specifications
| Description | Min | Max |
|---|---|---|
| Hot Side Temperature (ºC) | 25ºC | 50ºC |
| Qmax (Watts) | 50 | 57 |
| Delta Tmax (ºC) | 66 | 75 |
| Imax (Amps) | 6.4 | 6.4 |
| Vmax (Volts) | 14.4 | 16.4 |
| Module Resistance (Ohms) | 1.98 | 2.30 |
| Weight | 33 g |
|---|---|
| Brand | MikroElektronika |
